FUSE BLAST
FUSE BLAST
FUSE BLAST
FUSE BLAST
FUSE BLAST
Easily clean an entire build chamber in as little as 15 minutes through a fully automated process saving you time and money.
THE ULTIMATE 3D PRINTING SOLUTION FOR POST PROCESSING
Transform your cleaning routine with The Fuse Blast, designed for time-saving and cost-reducing operations. With the ability to thoroughly clean an entire build chamber in a rapid 15 minutes, this fully automated solution transforms maintenance into a seamless process. Experience consistent, professional parts that are clean to the touch.
10 MINUTE HANDS-FREE PART CLEANING
Pre-programmed cleaning routines automatically process an entire build chamber in as little as 10 minutes, while media filtering reduces post-processing time on Fuse Sift by 80%.
CONSUMER-GRADE PARTS
The ionization system prevents dust and media from re-settling on your prints, for clean-to-the-touch parts, while the polishing function allows you to go the extra mile and deliver parts with a smooth, semi-gloss, scuff-resistant, dye-ready surface finish.
EXTENDED MEDIA LIFE
Minimize overhead costs thanks to the passive filtering system that reduces media saturation and extends media life by four to eight times.
THE FUSE SERIES ECOSYSTEM
Fuse Blast seamlessly integrates into the Fuse Series ecosystem and streamlines your post-processing workflow, empowering you to fully clean a whole build chamber of printed parts within 30 minutes and drastically reducing labor time and cost. With the optional Polishing System, Fuse Blast takes your parts to another level by polishing them to a smooth, semi-gloss, and dye-ready surface finish, to deliver consistent, professional-grade results every time.
See the fuse blast in action
PRICING STARTING AT $10,999
Model | Fuse Blast
Printing Technology | Selective Laser Sintering (SLS)
Product Size | 100 × 75 × 175 cm, 39 × 29.6 × 68.7 in, Height when open: 195 cm (76.8 in)
Power Requirements | 120 VAC, 6 A (no dedicated circuit or vacuum required)
Hopper Capacity | Media hopper capacity 8.3 L, equivalent to 13 kg of 200–300 µm glass media Waste hopper capacity 10.6 L
FREQUENTLY ASKED QUESTIONS
Below you’ll find answers to our most commonly asked questions.
You can count on personalized support around the clock by email, live chat, or by joining a live webinar.
Can I polish parts in Fuse Blast?
How long does it take to post-process parts with Fuse Blast?
The typical post-processing time on the Fuse Series ecosystem should be around 15-30 minutes in total for most cases.
This includes the following steps:
- 5 to 10 mn extracting parts from the powder with Fuse Sift (manual)
- 10 to 15 mn cleaning time with Fuse Blast (automatic or manual)
- and/or (optional) 10 to 15 mn polishing with Fuse Blast (automatic or manual) [this step also cleans parts]
Note that some factors such as the material used, part geometry, number of parts, desired powder reclaim, and wear level of the media itself can influence the cleaning time required.
How clean do parts get in Fuse Blast?
Parts that have run through the Fuse Blast are visually clean and clean to the touch. No powder is present on visible surfaces after cleaning and parts can pass a ‘white glove’ test. Non-line-of-sight surfaces like internal cavities and passages may require manual touch-up using Fuse Blast’s manual mode and potentially additional brushes and tools dependent upon the printed geometry.
How much bigger is the build volume for the Form 4L than the Form 4?
The Form 4L features a build volume 4.6 times larger than the Form 4, allowing for large-format printing without compromising on speed.
What are the benefits of SLS 3D printing technology?
SLS 3D printing technology allows for strong, complex designs. It does not require support structures and often functions as end-use parts. The Fuse 1 is designed to be accessible and easy to use. The typical setup time takes less than 1 hour until you are ready to print.
